The Evil Twin is our staple and most universal twin tip board. Unlike evil twin Wi-Fi that will rob your bank account and Identity, you can trust this Evil Twin's network of wood, fiberglass, steel and plastic goods. It features our popular wood Core Core that has additional hardwood stringers from tip to tail along the insert packs to increase strength and channel more power and pop. We then wrap it in tri-axial fiberglass for a more aggressive flex from edge to edge and tip to tail. It's shaped in our Park 3BT profile with a bit less flatbase for swifter turns, truer carves and a bit more give when putting down lotty airs.

Features:

3BT Park
We developed our Park 3BT to be playful yet stable with a wide centerbase, slight camber and true twin shape to perform in terrain parks around the globe. The edge uplift areas start mid-binding and extend towards the tips for a loose feel with less bite. The wide centerbase on the other hand helps with stability off lips, on landings, in presses and at high speeds.
- Symmetrical nose and tail shape
- Wide centerbase

Core Core
Dual density full wood core composed of poplar with beech running tip to tail along the insert packs. The added beech hardwood strengthens the board’s backbone under the bindings and produces more pop from tip to tail while still offering a comfortable lateral flex.

V-Core Profile
Our full-length wood V-Core Profile has material milled out between the inserts to create a highly maneuverable and natural flexing feel between the feet. Under the bindings and towards the tips is normal thickness for strength to load up pop and put down landings.

Sintered Base
Hard and fast. Our sintered base material is tough stuff and its microscopic pores retain wax nuggets for a slick slide. To get the maximum benefits of a sintered base it needs to be waxed regularly. We finish ours with a proper hot wax before they leave the factory.

Tri Ax Laminate
Our tri-axial or three-way fiberglass is a weave of fibers in three directions: 45, 0 and -45 degrees. It’s like our bi-ax layup, but with added fibers running tip to tail. This stiffens up the board and adds more snap, while also offering better edge control and grip. The added strands of glasses make boards more aggressive and more responsive overall.

Kevlar Enhanced
Kevlar can stop a speeding bullet and it can also make your snowboard lighter and snappier in a simular way as carbon does. By placing Kevlar stringers in key areas of the board we can control the way a board flexes and responds to pressure.